
Durable, efficient transmission offers workhorse performance with minimal parts and maintenance.
- Controlled descent at half rated speed during power loss
- Long-lasting electromagnetic brake; always engaged when power is off
- Built-in overload sensor and overspeed brake
- Reinforced midair transfer point and wear plates at base
- Also available in larger dimensions with an electric motor by special order
- Hour meter records operating hours for maintenance tracking
A self-contained, single line unit, the ST-180 features a working swath of 8 ft (2.4 m). Adding flydecks enlarges the ST-180 to 14 ft (4.3 m), accommodating two workers to double productivity. Contractors can add modular platforms or plank sections between two ST-180s to form a double line suspended scaffold. With modular sections, workers can quickly connect sections without special tools to create a maximum reachable working swath of 56 or 62 ft (17.1 or 18.9 m) with flydecks attached. The unit comes equipped with numerous safety devices to ensure safe operation..
Key Features
- Electromagnetic-actuated primary brake engages whenever power is off
- Automated emergency brake engages in the event of sudden or excessive downward acceleration
- Overload limit switch halts upward travel when hoist is overloaded
- Durable, efficient transmission exceeds industry performance expectations
- Motor and winch are mounted below deck to reduce workspace obstructions and protect components from hazards in the work environment. The drive unit creates a low center of gravity for the work cage, providing greater protection and stability
- Level winding winch automatically and neatly stores wire rope on drum, eliminating dangling wire rope tails, ground hazards and premature rope replacement
- Wire rope positively attaches to the drum with swagged-on cable drum hook and is supplied with thimble eye on the rigging end
- Specially designed control lever for easy operation
- Reinforced midair transfer point
- Reliable vented transmission prohibits entry of corrosive agents for greater durability
| Specifications: ST-180 |
|---|
| Gross Load Capacity: |
1,250 lbs. (567 kg) |
| Dimensions: |
37 x 29 x 72 in. (940 x 737 x 1,829 mm) |
| Weight: |
Base model weight of 260 lbs. (117.9 kg) |
| Travel Speed: |
30 ft/min (9.2 m/min) |
| Voltage Options: |
220V single phase and 208V three phase |
| Drum Capacity: |
500 or 1,000 ft (152 or 304 m) |
| Wire Rope Size and Construction: |
5/16 in. (8 mm) Seale Construction 6 x 19 |
| Construction: |
Aluminum and steel |
Stay Connected:

